Price:

& eligible for FREE Super Saver Shipping on orders over $25. Details

Price as of Fri 10th Sep,2010 12:07 am CDT

Availability: Usually ships in 24 hours
Ships from and sold by Amazon.com

Freud LU96R010 10-Inch 80 Tooth TCG Thin Kerf Laminate Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud Industrial Series Teflon-coated thin kerf saw blade. A must for underpowered saws, thin kerf blades remove less material, which means youll get reduced waste and less power drain on your saw. Made with application specific micrograin carbide and TCG tooth design for flawless cuts in laminates and melamine! Tri-metal brazing technique produces strong, impact resistant...

Freud LM72R010 10-Inch 24 Tooth FTG Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

This 10" heavy duty blade gives smooth, fast rips in hardwoods and softwoods. A rigid blade body and razor-sharp, flat top carbide teeth produce a "glue line" precision cut, and the blades precision balance allows it to be used in gang-rip operations. Ideal working range is from 3/4" to 2-3/4" thick. Laser-cut anti-vibration slots practically eliminate the vibration that...

Freud P410 Premier Fusion 10-Inch 40 Tooth Hi-ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud engineers have discovered the ultimate combination - fused tooth grind geometry, blade body rigidity, precise tensioning, a special carbide blend and superior carbide brazing, non-stick Perma-Shield coating and high performance anti-vibration - all working together in concert to provide the ultimate cut. One blade does it all. Whether youre ripping or crosscutting, a...

Freud LU90M010 10-Inch 100 Tooth TCG Thin Stock Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.high tooth count with a 5 degree hook angle allows the teeth to slice efficiently through the material without binding.requirements on the cutting edge greatly differ with non-ferrous metals than with cutting wood.this in mind, Freud formulated a special...

Freud LU73M010 10-Inch 60 Tooth ATB Cabinetmaker's Crosscutting Saw Blade with 5/8-Inch Arbor

This heavy-duty crosscut blade is designed primarily for heavy use in a cabinetmakers shop. Combining a 10 degree hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a wide variety of materials most commonly used by cabinet makers in...

Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

This flat tooth rip blade gives new life to underpowered table saws and radial-arm saws because the thin kerf does not require much horsepower. The red Perma-Shield coating helps this 10" blade pull 1/3 less on the saw, which translates into over 33 more cutting power. The ideal working range is from 3/4" to 2-3/4" thick. 5/8" arbor .094 kerf...

A favorite on job sites, Makita's 10-inch compound miter saw has a highly dedicated following. Even though it's extremely portable (at 24.2 pounds), Makita's saw also boasts a super sturdy dual-post pivoting arm. A pivot fence adjusts for supporting large stock and flips back for bevel cuts. The saw bevels left up to 45 degrees and miters 45 degrees left and up to 52 degrees...

The Hitachi C10FCE2 10-Inch Compound Miter Saw provides smooth, accurate miters and crosscuts in a variety of workpieces, including wood, plywood, decorative panels, soft fiberboard, hard board, and aluminum sashes. Its flexible miter angles and compound cutting capability provide versatility on the job. An ideal tool for trim carpenters, framers, and woodworkers who demand...

4410L Model Code: AA (part# 4410L) This item features: -Arbor Diam: 5/8 in. -Amps: 15.00 A. -Power Cap.: 3 hp [Max]. -Voltage: 120.00 VAC. -Price is for 1 Each. Model Code  Model Description AABlade Diam:10 in, Speed:4800 rpm [Max], Cutting Cap. 2:1-1/4 X 8-1/2 in. @ 45 /45 Right, 2 X 12 in. @ 0 /45 , 2 X 8-1/2 in. @ 45 /45 Left, 3-5/8 X 12 in. @ 0 /0 , 3-5/8 X 8-1/2 in....

Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold the...